SNI 13-6181-1999 Retaking of heavy liquid from dressing solvent used in mineralogy analysis《矿物学分析》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

AECMA PREN 2357-1986 Aerospace Series Stud-Ends in Corrosion Resisting Steel Swaged on Type Control Cable Dimensions and Loads Edition 2《航空航天系列钉扣陷型防腐钢控制电缆尺寸和负荷2版》.pdf

AECMA PREN 2358-1985 Aerospace Series Eye-Ends in Corrosion Resisting Steel Swaged on Type Control Cable Dimensions and Loads Edition 1《 航空和航天.用于操纵钢索的不锈钢带眼的钢索端头 尺寸和负荷.第1版》.pdf

AECMA PREN 2359-1985 Aerospace Series Fork-Ends in Corrosion Resisting Steel Swaged on Type Control Cable Dimensions and Loads Edition 1《航空和航天 用于张紧操纵钢索的不锈钢带叉的钢索端头 尺寸和负荷.第1版》.pdf

AECMA PREN 2360-1985 Aerospace Series Fork-Ends for Rolling Bearings in Corrosion Resisting Steel Swaged on Type Control Cable Dimensions and Loads Edition 1《航空和航天 用于张紧操纵钢索的不锈钢滚珠轴承.pdf

AECMA PREN 2361-1985 Aerospace Series Ball-Ends Double Shank in Corrosion Resisting Steel Swaged on Type Control Cable Dimensions and Loads Edition 1《航空和航天系列 嵌入操纵缆索的钢制抗腐蚀球端面接头 尺寸和负.pdf

AECMA PREN 2362-1985 Aerospace Series Ball-Ends in Corrosion Resisting Steel Swaged on Type Control Cable Dimensions and Loads Edition 1《航空和航天系列 嵌入操纵缆索的钢制抗腐蚀球端面接头 尺寸和负荷.第1版》.pdf

AECMA PREN 2363-1981 Locking Clips for Turnbuckles of Control Cables Dimensions Aerospace Series Edition 1《航空和航天 操纵钢索的夹紧装置用保险弹簧 尺寸.第1版》.pdf

AECMA PREN 2366-1983 Sheets and Strips Heat Resisting Alloys Cold Rolled Thickness a Less Than or Equal to 3 mm Dimensions Aerospace Series Edition 1《航空航天系列冷轧铝合金片和厚度a小于或等于3mm 尺寸.第1.pdf

AECMA PREN 2367-1982 Split Pins in Steel EN2573 Aerospace Series Edition 1《航空航天系列EN2573钢制开口销.第1版》.pdf