SNI 16-2629-1992 Steel wheel cupboard for hospitals《医院用铁轮橱柜》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

EN 14313-2009 0000 Thermal insulation products for building equipment and industrial installations - Factory made polyethylene foam (PEF) products - Specification (Incorporates Ame.pdf

EN 14313-2015 en Thermal insulation products for building equipment and industrial installations - Factory made polyethylene foam (PEF) products - Specification《应用于建筑设备和工业设施的热绝缘产品 .pdf

EN 14314-2009 2500 Thermal insulation products for building equipment and industrial installations - Factory made phenolic foam (PF) products - Specification (Incorporates Amendmen.pdf

EN 14314-2015 en Thermal insulation products for building equipment and industrial installations - Factory made phenolic foam (PF) products - Specification《应用于建筑设备和工业设施的热绝缘产品 工厂生产的.pdf

EN 14315-1-2013 en Thermal insulating products for buildings - In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products - Part 1 Specification for t.pdf

EN 14315-2-2013 en Thermal insulating products for buildings - In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products - Part 2 Specification for t.pdf

EN 14316-1-2004 en Thermal insulation products for buildings - In-situ thermal insulation formed from expanded perlite (EP) products - Part 1 Specification for bonded and loose-fil.pdf

EN 14316-2-2007 en Thermal insulating products for buildings - In-situ thermal insulation formed from expanded perlite (EP) products - Part 2 Specification for the installed produc.pdf

EN 14317-1-2004 en Thermal insulation products for buildings - In-situ thermal insulation formed from exfoliated vermiculite (EV) products - Part 1 Specification for bonded and loo.pdf