SNI 16-6654-2002 Single-use sterile infusion sets for general medical《一般医疗用途的一次性无菌输液(整套)》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM F1472-2002a Standard Specification for Wrought Titanium -6Aluminum -4Vanadium Alloy for Surgical Implant Applications (UNS R56400)《外科植入设备用锻制钛-6铝-4钒合金的标准规范》.pdf

ASTM F1472-2008 Standard Specification for Wrought Titanium-6Aluminum-4Vanadium Alloy for Surgical Implant Applications (UNS R56400).pdf

ASTM F1472-2008e1 Standard Specification for Wrought Titanium-6Aluminum-4Vanadium Alloy for Surgical Implant Applications (UNS R56400)《外科植入设备用锻制钛6铝4钒合金的标准规范(UNS R56400)》.pdf

ASTM F1472-2014 Standard Specification for Wrought Titanium-6Aluminum-4Vanadium Alloy for Surgical Implant Applications (UNS R56400)《外科植入物 (UNS R56400) 用锻制钛6和铝4钒合金的标准规格》.pdf

ASTM F1473-2007 Standard Test Method for Notch Tensile Test to Measure the Resistance to Slow Crack Growth of Polyethylene Pipes and Resins《测量聚乙烯管和树脂的抗裂缝缓慢扩展的切口拉伸试验用标准试验方法》.pdf

ASTM F1473-2011 Standard Test Method for Notch Tensile Test to Measure the Resistance to Slow Crack Growth of Polyethylene Pipes and Resins《测量聚乙烯管和树脂抗裂缝缓慢扩展的切口拉伸试验用标准试验方法》.pdf

ASTM F1473-2013 Standard Test Method for Notch Tensile Test to Measure the Resistance to Slow Crack Growth of Polyethylene Pipes and Resins《测量聚乙烯管和树脂抗裂缝缓慢扩展的切口拉伸试验用标准试验方法》.pdf

ASTM F1473-2016 Standard Test Method for Notch Tensile Test to Measure the Resistance to Slow Crack Growth of Polyethylene Pipes and Resins《测量聚乙烯管和树脂抗裂缝缓慢扩展的切口拉伸试验用标准试验方法》.pdf

ASTM F1473-2018 Standard Test Method for Notch Tensile Test to Measure the Resistance to Slow Crack Growth of Polyethylene Pipes and Resins《测量聚乙烯管和树脂抗缓慢裂纹扩展的缺口拉伸试验的标准试验方法》.pdf