SNI 19-0407-1998 Rockwell hardness test methods (scales A - B - C - D - E - F - G - H - K )《ROCKWELL硬度检测法》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

QJ 806-1983 机床夹具零件及部件 带轴向紧固螺杆齿条式定位器.pdf

QJ 806.2A-1997 机床夹具零件及部件 带轴向紧固螺杆齿条式定位器 衬套.pdf

QJ 807-1983 机床夹具零件及部件 虎钳式夹紧装置.pdf

QJ 807A-1997 机床夹具零件及部件 虎钳式夹紧装置.pdf

QJ 808-1983 机床夹具零件及部件 轴向夹紧装置.pdf

QJ 808.1A-1997 机床夹具零件及部件 轴向夹紧装置 夹箍.pdf

QJ 809-1983 固体推进剂和固体发动机绝热层热导率的测定方法.pdf

QJ 809-1994 复合固体推进剂热导率和比热容测定方法 准稳态法.pdf

QJ 810-1983 电起爆器设计、制造技术条件.pdf