SNI 19-2483-1991 Test methods for phospate and ortophospate content on water by spectrophotometers in a ascorbic acid《水质 磷酸盐含量分光光度计测试方法》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

EN 846-9-2000 Methods of Test for Ancillary Components for Masonry - Part 9 Determination of Flexural Resistance and Shear Resistance of Lintels《砖石结构辅助部件试验方法 第9部分 过梁抗挠度和抗剪切度的测定》.pdf

EN 846-9-2016 en Methods of test for ancillary components for masonry - Part 9 Determination of flexural resistance and shear resistance of lintels《砖石工程用配套部件测试方法 第9部分 弯曲性能和梁的抵抗力的测定.pdf

EN 847-1-2013 en Tools for woodworking - Safety requirements - Part 1 Milling tools circular saw blades《木工加工工具 安全性要求 第1部分 铣刀和圆盘锯条》.pdf

EN 847-1-2017 en Tools for woodworking - Safety requirements - Part 1 Milling tools circular saw blades.pdf

EN 847-2-2013 en Tools for woodworking - Safety requirements - Part 2 Requirements for the shank of shank mounted milling《木工工具 安全性要求 第2部分 装刀柄铣刀的刀柄的要求》.pdf

EN 847-2-2017 en Tools for woodworking - Safety requirements - Part 2 Requirements for the shank of shank mounted milling tools circular saw blades.pdf

EN 847-3-2013 en Tools for woodworking - Safety requirements - Part 3 Clamping devices《木工工具 安全性要求 第3部分 钳位设备》.pdf

EN 848-1-2007 en Safety of woodworking machines - One side moulding machines with rotating tool - Part 1 Single spindle vertical moulding machines (Incorporates Amendment A2 2012)《.pdf

EN 848-2-2007 en Safety of woodworking machines - One side moulding machines with rotating tool - Part 2 Single spindle hand fed integrated fed routing machines (Incorporates Amend.pdf