SNI 3752-2009 Cocoa milk powder《巧克力奶粉》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM D5933-1996(2007) Standard Specification for 2 5 8-in and 4-in Diameter Metal Shear Plates for Use in Wood Constructions《木结构用直径为25 8 英寸和4 英寸的金属剪切板的标准规范》.pdf

ASTM D5933-1996(2013) 1875 Standard Specification for 2 5 8-in and 4-in Diameter Metal Shear Plates for Use in Wood Constructions《木结构用直径为25 8 英寸和4 英寸的金属剪切板的标准规范》.pdf

ASTM D5946-2004 Standard Test Method for Corona-Treated Polymer Films Using Water Contact Angle Measurements《用水触点角度测量法测定电晕处理聚合物薄膜的标准试验方法》.pdf

ASTM D5946-2009 809 Standard Test Method for Corona-Treated Polymer Films Using Water Contact Angle Measurements《用测量水接触角测量结果测定经电晕处理的聚合物薄膜的试验方法》.pdf

ASTM D5946-2017 red 6250 Standard Test Method for Corona-Treated Polymer Films Using Water Contact Angle Measurements《对电晕处理聚合物薄膜进行水接触角测量的标准试验方法》.pdf

ASTM D5947-2006 Standard Test Methods for Physical Dimensions of Solid Plastics Specimens《固体塑料样品物理尺寸的标准试验方法》.pdf

ASTM D5947-2011 2500 Standard Test Methods for Physical Dimensions of Solid Plastics Specimens《固体塑料样品的物理尺寸的标准试验方法》.pdf

ASTM D5947-2018 5000 Standard Test Methods for Physical Dimensions of Solid Plastics Specimens.pdf

ASTM D5948-2005(2012) 5584 Standard Specification for Molding Compounds Thermosetting《热固性模铸化合物的标准规范》.pdf