SNI 6945-2013 Jamur merang segar.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

BS ISO 8133-2014 Hydraulic fluid power Mounting dimensions for accessories for single rod cylinders 16 MPa (160 bar) compact series《液压流体动力 16 MPa (160 bar) 紧凑型系列单杆汽缸附件的安装尺寸》.pdf

BS ISO 814-2017 Rubber vulcanized or thermoplastic Determination of adhesion to metal Two-plate method《硫化橡胶或热塑性橡胶 金属附着力的测定 双板法》.pdf

BS ISO 815-1-2014 Rubber vulcanized or thermoplastic Determination of compression set At ambient or elevated temperatures《硫化橡胶和热塑性橡胶 压缩形变的测定 室温和更高温度》.pdf

BS ISO 815-2-2014 Rubber vulcanized or thermoplastic Determination of compression set At low temperatures《硫化橡胶或热塑性橡胶 压缩永久变形的测定 低温条件》.pdf

BS ISO 8168-2016 Aerospace Bolts with MJ threads made of heat and corrosion resisting steel strength class 1 100 MPa Procurement specification《航空航天 强度等级为1100MPa、带MJ螺纹的耐腐蚀和耐热钢制螺栓 采购.pdf

BS ISO 817-2014 Refrigerants Designation and safety classification《制冷 命名和安全分类》.pdf

BS ISO 8178-1-2017 Reciprocating internal combustion engines Exhaust emission measurement Test-bed measurement systems of gaseous and particulate emissions《往复式内燃机 废气排放测量 排气和颗粒废物排放量.pdf

BS ISO 8178-10-2003 Reciprocating internal combustion engines - Exhaust emission measurement - Test cycles and test procedures for field measurement of exhaust gas smoke emissions r.pdf

BS ISO 8178-11-2006 Reciprocating internal combustion engines - Exhaust emission measurement - Test-bed measurement of gaseous and particulate exhaust emissions from engines used ic.pdf