SNI 7277 6-2008 Terms and definition - Part 6 Dragging trawls《术语和定义 第6部分 拉网捕鱼》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

CNS 7187-1984 Accuracy of Cylindrical Gear Teeth General Bases《圆柱齿轮轮齿之精度（一般基准）》.pdf

CNS 7188-1981 Remote Control Gear with Transmission Tubing for Manual Operation Crown Gear Units Slewable《管式遥远控制杆管（可摇转之冠状齿轮传导）》.pdf

CNS 7189-1981 Remote Control Gear with Transmission Tubing for Manual Operation Bevel Gear Units《遥远控制杆管（斜齿轮传导）》.pdf

CNS 7190-1981 Cylindrical Shaft Ends Dimensions Transmissible Torgues《圆柱轴端尺度，可传动扭矩》.pdf

CNS 7191-2006 Reduction gears of cranes《起重机之变速箱》.pdf

CNS 7192-1981 Basic Profiles for Hobs of Bushed Roller Chains and Roller Chains《滚子链轮与套筒链轮滚齿刀基准轮廓》.pdf

CNS 7193-1981 Basic Profiles for Milling Cutters of Busher Roller Chains and Roller Chains《滚子链轮与套筒链轮铣刀基准轮廓》.pdf

CNS 7194-2001 Single-start solid (monobloc) gear hobs with tenon drive or axial keyway modules 1 to 40-Nominal dimensions《具有榫槽或键槽之单纹螺纹滚齿刀﹝模数1至40﹞─标称尺度》.pdf

CNS 7195-1981 Tools for Metal - Working Bores Keys and Driving Features for Tools with Parallel Bore and with 1 in 30 Taper Bore《孔、槽及驱动件（金属切削刀具用）》.pdf