SNI 7555 14-2011 Kayu dan produk kayu - Bagian 14 Meja belajar untuk sekolah menengah atas.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

SAE AS 81914-2011 Tubing Plastic Flexible Convoluted Conduit General Specification for《导管回旋状柔性塑料管的一般规格》.pdf

SAE AS 81934 1A-2004 Bearing Sleeve Plain Self-Lubricating -65F to 325F《自润滑滑动轴承-65鳩至325鳩》.pdf

SAE AS 81934 2A-2004 Bearing Sleeve Flanged Self-Lubricating -65F to 325F《自润滑法兰滑动轴承-65鳩至325鳩》.pdf

SAE AS 81935 1A-2011 Bearing Plain Rod End Self Alighning Self Lubricating Wide Extrenally Threaded -65 to +325F《 -65 至 +325℉宽外部螺纹自润滑和自对准杆端平纹轴承》.pdf

SAE AS 81935 2B-2011 BEARING PLAIN ROD END SELF-ALIGNING SELF-LUBRICATING WIDE INTERNALLY THREADED -65 TO +325 《 -65 至 +325℉宽内部螺纹自润滑和自对准杆端平纹轴承》.pdf

SAE AS 81935 5A-2011 BEARING PLAIN ROD END SELF-ALIGNING SELF-LUBRICATING NARROW INTERNALLY THREADED -65 TO +325 《 -65至+325℉狭窄内螺纹自润滑和自对准杆端平纹轴承》.pdf

SAE AS 81935 6A-2011 BEARING PLAIN ROD END SELF-ALIGNING SELF-LUBRICATING WIDE EXTERNALLY THREADED STEEL CORROSION RESISTANT (CRES)-65 TO +325 《 -65至 + 325℉耐蚀钢(CRES)宽外部螺纹自润滑和自对准杆端平纹轴.pdf

SAE AS 81935 7A-2011 BEARING PLAIN ROD END SELF-ALIGNING SELF-LUBRICATING WIDE INTERNALLY THREADED STEEL CORROSION RESISTANT (CRES)-65 TO +325 《 -65至+325℉的耐蚀钢宽内螺纹自润滑和自对准杆端平纹轴承》.pdf

SAE AS 81935 8-2011 BEARING PLAIN ROD END SELF-ALIGNING SELF-LUBRICATING NARROW EXTERNALLY THREADED STEEL CORROSION RESISTANT (CRES)-65 TO +325 《带自调整自润滑耐腐蚀(CRES)窄型外螺纹钢杆端的滑动轴承(-65至.pdf