SNI 7555 24-2011 Furniture - Part 24 Guest table - Rattan.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST 28954-1991 Surface active agents and detergents Determination of anionic-active matter by manual or mechanical direct two-phase titration procedure《表面活性物与洗 涤剂 用手工或机械法的直接两相滴定法的.pdf

GOST 28955-1991 Devices for pouring petroleum products in tankers General requirements and test technical methods《汽车油箱中石油产品的注入用装置 一般技术要求与试验方法》.pdf

GOST 28956-1991 Contact lenses Terms and definitions《接触透镜 术语与定义》.pdf

GOST 28958-1991 Machinery for forestry Disc trenchers Disc-to-hub flange fixing dimensions《林业用机械 盘式挖沟机在套筒上固定盘的法兰尺寸》.pdf

GOST 28959-1991 Nitric acid for industrial use Evaluation of the nitric acid concentration by measurement of density《工业用硝酸 测量密度时的浓度的测定方法》.pdf

GOST 28961-1991 Plain washers for metric bolts screws and nuts General plan《米制螺栓、螺钉及螺帽用平垫圈》.pdf

GOST 28962-1991 Hexagon socket head shoulder screws Specifications《头部带内六角的有加粗杆的螺钉 技术条件》.pdf

GOST 28965-1991 Zipper Methods of checking《钩环与拉链 检验方法》.pdf

GOST 28966 1-1991 Polymer adhesives Method of determining cleavage strength《聚合胶 分层强度的测定》.pdf