SNI 8224-2016 Persyaratan keselamatan dan metode uji untuk sepeda anak.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

SAE AMS 4338A-2007 Aluminum Alloy Extrusions 4 0Cu - 1 3Mg - 0 60Mn (2026-T3511) Solution Heat Treated and Stress Relieved by Stretching (UNS A92026)《4 0Cu 1 3Mg 0 60Mn (2026-T3511.pdf

SAE AMS 4339A-2004 Aluminum Alloy Rolled or Cold Finished Bars and Rods 4 4Cu - 1 5Mg - 0 60Mn (2024-T851) Solution Heat Treated Cold Worked and Artificially Aged (UNS A92024)《经4 4.pdf

SAE AMS 4340E-2006 Aluminum Alloy Extrusions 6 2Zn - 2 3Cu - 2 2Mg - 0 12Zr (7050-T76511) Solution Heat Treated Stress Relieved Straightened and Overaged (UNS A97050)《通过拉直和覆盖释放应力的6.pdf

SAE AMS 4341E-2006 Aluminum Alloy Extrusions 6 2Zn - 2 3Cu - 2 2Mg - 0 12Zr (7050-T73511) Solution Heat Treated Stress Relieved by Stretching Straightened and Overaged (UNS A97050).pdf

SAE AMS 4342E-2007 Aluminum Alloy Extrusions 6 2Zn - 2 3Cu - 2 2Mg - 0 12Zr (7050-T74511) Solution Heat Treated Stress Relieved Straightened and Overaged (UNS A97050)《6 2Zn 2 3Cu 2.pdf

SAE AMS 4343D-2004 Aluminum Alloy Extrusions 7 7Zn - 2 4Mg - 1 6Cu - 0 16Cr (7149-T73511) Solution Heat Treated Stress Relieved by Stretching and Overaged (UNS A97149)《通过拉伸和过老化的固溶热.pdf

SAE AMS 4344D-2011 Aluminum Alloy Extrusions 5 6Zn - 2 5Mg - 1 6Cu - 0 23Cr (7175-T73511) Solution Heat Treated Stress Relieved by Stretching Straightened and Overaged (UNS A97175).pdf

SAE AMS 4345B-2005 Aluminum Alloy Extrusions 6 4Zn - 2 4Mg - 2 2Cu - 0 12Zr (7150-T77511) Solution Heat Treated Stress-Relieved Straightened and Overaged (UNS A97150)《溶液热处理的、应力消除、直.pdf

SAE AMS 4347D-2014 Aluminum Alloy Sheet 1 0Mg - 0 8Si - 0 8Cu - 0 5Mn (6013-T4) Solution Heat Treated and Naturally Aged (UNS A96013).pdf