SNI IEC 60601-2-27-2016 Perangkat elektromedik - Bagian 2-27 Persyaratan khusus untuk keselamatan dasar dan kinerja esensial peralatan monitor elektrokardiografik.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM D5419-2009 5625 Standard Test Method for Environmental Stress Crack Resistance (ESCR) of Threaded Plastic Closures《螺纹塑料密封箱抗环境应力裂开性能的标准试验方法》.pdf

ASTM D5419-2014 red 0700 Standard Test Method for Environmental Stress Crack Resistance (ESCR) of Threaded Plastic Closures.pdf

ASTM D5419-2014a 9014 Standard Test Method for Environmental Stress Crack Resistance (ESCR) of Threaded Plastic Closures《螺纹塑料围护结构抗环境应力开裂 (ESCR) 的标准试验方法》.pdf

ASTM D5420-2004 Standard Test Method for Impact Resistance of Flat Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Weight (Gardner Impact)《使用落锤冲击(Gardner冲击)法的硬质塑.pdf

ASTM D5420-2010 5000 Standard Test Method for Impact Resistance of Flat Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Weight (Gardner Impact)《使用落锤冲击(Gardner冲击).pdf

ASTM D5420-2016 6880 Standard Test Method for Impact Resistance of Flat Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Weight (Gardner Impact)《通过下落重量冲击 (加德纳冲击) .pdf

ASTM D5421-2005 Standard Specification for Contact Molded Fiberglass (Glass-Fiber-Reinforced Thermosetting Resin) Flanges《接触模制玻璃纤维(玻璃-纤维-增强热固性树脂)法兰的标准规范》.pdf

ASTM D5421-2005(2010) 0625 Standard Specification for Contact Molded Fiberglass (Glass-Fiber-Reinforced Thermosetting Resin) Flanges《接触模制 玻璃纤维 (玻璃-纤维-增强热固树脂)法兰的标准规范》.pdf

ASTM D5421-2015 9949 Standard Specification for Contact Molded &ldquo Fiberglass&rdquo (Glass-Fiber-Reinforced Thermosetting Resin) Flanges《接触模制玻璃纤维 (玻璃纤维增强热固树脂) 法兰的标准规格》.pdf