SNI ISO 11193 2-2010 Single-use medical examination gloves - Part 2 Specification for gloves made from poly(vinyl chloride).pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSS-M2G316-B8-2018 ADHESIVE MOISTURE CURING URETHANE ONE COMPONENT PRIMERLESS TO NON SILANE BASED CLEARCOAT PAINT INCREASED UV-STABILITY TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M2G337-B-2007 ADHESIVE - EPOXY BASED STRUCTURAL 10 - 40 % EXPANDING HEAT CURING WELDABLE IMPACT RESISTANT - TO BE USED WITH FORD WSS-M99P1111-A 《耐冲击可焊热固化伸展率10-40%的结构用环氧树.pdf

FORD WSS-M2G339-A5-2003 ADHESIVE EPOXY THERMAL CURE SURFACE MOUNTED COMPONENTS TO BE USED WITH FORD WSS-M99P1111-A 《表面安装部件用热固化环氧树脂胶粘剂 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSS-M2G348-A10-2013 ADHESIVES ANAEROBIC (AN) GASKETING TO BE USED WITH FORD WSS - M99P1111 - A (Shown on FORD WSK-M2G348-A1).pdf

FORD WSS-M2G355-B-2015 ADHESIVE WATERBORNE RUBBER BASED ONE COMPONENT ROOM TEMPERATURE CURING TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M2G373-A2-2008 ADHESIVE HEM FLANGE ALUMINUM BONDING TWO COMPONENT 50 - 70 C GEL POINT TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSB-M2G373-A)《凝胶点为50-70℃的两组分铝粘合用.pdf

FORD WSS-M2G373-A2-2016 ADHESIVE HEM FLANGE ALUMINUM BONDING TWO COMPONENT 50 - 70 C GEL POINT TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M2G373-B-2008 ADHESIVE HEM FLANGE STEEL BONDING TWO COMPONENT 90 - 120 MINUTE GEL POINT 100 - 120 C GEL POINT TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSB-M2G3.pdf

FORD WSS-M2G373-B-2016 ADHESIVE HEM FLANGE STEEL BONDING TWO COMPONENT 90 - 120 MINUTE GEL POINT 100 - 120 GEL POINT TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSB-M2G373.pdf