SNI ISO 12402-6-2011 Personal flotation devices - Part 6 Special purpose lifejackets and buoyancy aids - Safety requirements and additional test methods《个人浮游装置 第6部分 特殊用途救生衣和浮具 安全要求.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

CSN 24 3312-1952 ne《螺母的夹角（顶角60）》.pdf

CSN 24 3313-1952 Clamping tools Fixing centres with sintered carbide insert and nut (top angle 60 degrees)《硬质合金为基体的插入物（顶角60）》.pdf

CSN 24 3316-1975 Flattened fixing centres (top angle alfa=60φ)《扁平固定顶针（60顶角）》.pdf

CSN 24 3318-1975 Eccentric adjustable fixing centres《偏心可调稳固顶针》.pdf

CSN 24 3320-1975 Fixing centres (top anfle alfa=90φ)《固定顶针（90顶角）》.pdf

CSN 24 3321-1952 Clamping tools Fixing centres with nut (top angle 90 degrees)《螺母尖角（顶角90 ）》.pdf

CSN 24 3322-1952 Clamping tools Fixing centres with nut and taper shank 1 10 (top angle 90 degrees)《带螺母和带圆锥柄的尖角1：10 （顶角90度 ）》.pdf

CSN 24 3329-1986 Live fixing centres (top angle 60φ) with needle roller bearings《带滚针轴承的固定活顶针（60顶角）》.pdf

CSN 24 3330-1975 Centre punch marks for fixing (alfa=60φ)《稳固用中心起标点（60顶角）》.pdf