SNI ISO 12466-2-2010 Plywood - Bonding quality - Part 2 Requirements.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

NS 1544-1992 Vertical cylindrical steel tanks for storage of flammable A B and C liquids at internal pressure approximating atmospheric pressure (Corrigendum A1 1992 included).pdf

NS 1546-1986 Steel tanks for atmospheric storage of flammable liquids - Horizontal cylindrical above ground tanks 1 2 to 50 cubic metres.pdf

NS 1547-1986 Steel tanks for atmospheric storage of flammable liquids - Vertical cylindrical above ground tanks with plane bottom and conical top 3 to 50 cubic metres.pdf

NS 1561-1972 ISO system of limits and fits - Inspection of plain workpieces.pdf

NS 1562-1972 ISO system of limits and fits - Tolerances for gauges.pdf

NS 1563-1972 ISO system for limits and fits - Inspection limits for indicating measuring instruments.pdf

NS 1564-1976 System of cone tolerances for conical workpieces from C=1 3 to 1 500 and lengths from 6 to 630 mm.pdf

NS 157-1984 Gaskets for flanges with raised face and flanges with flat face - Dimensions and quality requirements - Nominal pressure PN 2 5 to PN 40.pdf

NS 16001-1989 Wrought copper and copper alloys - Summary.pdf