SNV 24820-1937 《铝及铝合金阳极氧化 阳极氧化膜的封孔质量评定磷 铬酸法》.pdf

相关资源

GB T 8753.2-2005 铝及铝合金阳极氧化 氧化膜封孔质量的评定方法 第2部分;硝酸预浸的磷铬酸法.pdf

GB T 8753.1-2005 铝及铝合金阳极氧化 氧化膜封孔质量的评定方法 第1部分;无硝酸预浸的磷铬酸法.pdf

GB T 8013-1987 铝及铝合金阳极氧化-阳极氧化膜的总规范.pdf

GB T 14952.1-1994 铝及铝合金阳极氧化 阳极氧化膜封孔质量的评定.pdf

GB T 23612-2017 铝合金建筑型材阳极氧化与阳极氧化电泳涂漆工艺技术规范.pdf

GB T 23612-2009 铝合金建筑型材阳极氧化与阳极氧化电泳涂漆工艺技术规范.pdf

GB T 23612-2017 铝合金建筑型材阳极氧化与阳极氧化电泳涂漆工艺技术规范.pdf

GB T 8754-2006 铝及铝合金阳极氧化 阳极氧化膜绝缘性的测定 击穿电位法.pdf

GB T 12967.5-1991 铝及铝合金阳极氧化 用变形法评定阳极氧化膜的抗破裂性.pdf

猜你喜欢

IS 7289-1992 Test chart for woodworking planing machines for two three ro four-side dressing (First Revision).pdf

IS 7296-1992 Test chart for woodwoeking surface planing and thicknessing machines (First Revision).pdf

IS 7309-1993 Reach and straddle forklift trucks Method of stability tests (First Revision).pdf

IS 7312-1993 Welded and seamless steel dissolved acetylene gas cylinders Specification (Second Revision).pdf

IS 7317-1993 Code of practice for uniaxial jacking test for modulus of deformation of rock (First Revision).pdf

IS 7345-1994 Cardiovascular surgery instruments - anastomosis forceps and clamps - patterns shapes and dimensions.pdf

IS 7363-1993 Inland vessels Tests and trials for harbour tugs (First Revision).pdf

IS 738-1994 Wrought aluminium and its alloys-drawn tubes for general engineering purposes- specification.pdf

IS 739-1992 Wrought aluminium and aluminium alloys Wire for general engineering purposes Specification (Third Revision).pdf