SNV 24822-1937 《电弧焊接整流器规则》.pdf

相关资源

EJ 403-1989 三十万千瓦压水堆核电厂一回路工艺系统大口径电弧焊接不锈钢卷制钢管及管件技术条件.pdf

JIS C 3663-6：2007 额定电压≤450 750V的橡胶绝缘电缆 第6部分 电弧焊接电极电缆.pdf

EJ 403-1989 三十万千瓦压水堆核电厂.一回路工艺系统大口径电弧焊接不锈钢卷制钢管及管件技术条件.pdf

EJ T 403-1999 压水堆核电厂一回路系统大口径电弧焊接不锈钢卷制钢管及管件技术条件.pdf

STAS SR 11280-1993 Wire feeding devices for arc welding General technical requirements for quality《电弧焊接的送线装置 通用质量技术要求》.pdf

STAS SR EN 439-1996 Welding consumables Shielding gases for arc welding and cutting《焊接消耗品 电弧焊接与切割的屏蔽气体》.pdf

STAS 12261-1984 GASES USED IN THE GAS SHIEL DED ARC WELDING Gasification《气体屏蔽电弧焊接中使用的燃气 汽化 》.pdf

STAS 8143-1987 ROTATING GENERATORS AND CONVERTERS FOR ELECTRICAL ARC WELDING General technical requirements《电弧焊接用的旋转发电机和转换器 一般技术要求 》.pdf

ASTM B547 B547M-2002 Standard Specification for Aluminum and Aluminum-Alloy Formed and Arc-Welded Round Tube《成形的和电弧焊接的铝及铝合金圆管标准规范》.pdf

AWS D16 1M D16 1-2004 Specification for Robotic Arc Welding Safety《机器人电弧焊接安全规范》.pdf

猜你喜欢

ASTM UOP602-2015 Soxhlet Extraction of Catalyst《催化剂的索格利特萃取法》.pdf

ASTM UOP614-2016 Heptane or Toluene Insoluble Matter in Petroleum Oils Using Vacuum Filtration《利用真空过滤测定石油油料中的庚烷或甲苯不溶物质》.pdf

ASTM UOP791-2016 Sulfur Components in LPG Fractions by GC-SCD《气相色谱-硫化学发光检测法测定液化石油气组分中的硫组分》.pdf

ASTM UOP925-2016 Nickel Molybdenum Phosphorus Cobalt and Aluminum in Fresh Catalysts by ICP-OES《采用ICP-OES法测定新鲜催化剂中的镍 钼 磷 钴和铝》.pdf

ASTM UOP936-2016 Combined Nitrogen in LPG by Chemiluminescence《利用化学发光法测定液化石油气中的化合态氮》.pdf

ASTM UOP947-2015 Length and Diameter of Extruded Catalyst Using a Semi-Automated Method《采用半自动法的挤压催化剂的长度和直径》.pdf

ASTM UOP987-2015 Low Trace Sulfur in Liquid Hydrocarbons by Oxidative Combustion with Ultraviolet Fluorescence Detection《采用带紫外线荧光检测的氧化燃烧法测定液态烃中的低微量硫》.pdf

ASTM UOP991-2017 Trace Chloride Fluoride and Bromide in Liquid Organics by Combustion Ion Chromatography (CIC)《燃烧离子色谱法(CIC)测定液态有机物中的痕量氯化物 氟化物和溴化物》.pdf

ASTM UOP993-2015 Water in Solids by Furnace Desorption with Volumetric Karl Fischer Titration《通过卡尔费瑟容量滴定法用熔炉解析作用去除固体中的水分》.pdf