SNV 29617-1966 Textiles Tests for colour fastness Section P02 Colour fastness to pleating Steam pleating《电源 工业插接触点10A，50和500 V50 和 60 1000 Hz 类型32， 33，41和43》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

AECMA PREN 3518-1994 Aerospace Series Steel FE-PL2105 Air Melted Hardened and Tempered Forgings De Less Than or Equal to 150 mm 1080 MPa Less Than or Equal to Rm Less Than or Equal.pdf

AECMA PREN 3519-1994 Aerospace Series Steel FE-PL2105 Air Melted Hardened and Tempered Bar for Machining De Less Than or Equal to 150 mm 880 MPa Less Than or Equal to Rm Less Than .pdf

AECMA PREN 3520-1994 Aerospace Series Steel FE-PL2105 Air Melted Softened Forging Stock a or D Less Than or Equal to 300 mm Edition P 2《航空航天系列.钢FE-PL2105空气锻造和硬化和调和钢棒材和线材 a或D小于或等于30.pdf

AECMA PREN 3521-1998 Aerospace Series Steel FE-PL2106 (30CrNiMo8) Air Melted Hardened and Tempered Bar for Machining De Less Than or Equal to 150 mm 900 MPa Less Than or Equal to R.pdf

AECMA PREN 3522-1988 Aerospace Series Steel FE-PL79 Softened Reference Heat Treatment Carburized Hardened and Tempered Forging Stock De Less Than or Equal to 200 mm Issue P 1《航空航天系.pdf

AECMA PREN 3523-1999 Aerospace Series Steel FE-PL1505 (15CrMoV6) Air Melted Hardened and Tempered Bar for Machining De Less Than or Equal to 100 mm 1 080 MPa Less Than or Equal to .pdf

AECMA PREN 3524-1999 Aerospace Series Steel FE-PL1505 (15CrMoV6) Air Melted Hardened and Tempered Sheet and Strip 2 mm Less Than or Equal to a Less Than or Equal to 6 mm 1 080 MPa .pdf

AECMA PREN 3525-1999 Aerospace Series Steel FE-PL1505 (15CrMoV6) Air Melted Hardened and Tempered Plate 6 mm Less Than or Equal to a Less Than or Equal to 20 mm 1 080 MPa Less Than航.pdf

AECMA PREN 3526-1999 Aerospace Series Steel FE-PL1505 (15CrMoV6) Air Melted Hardened and Tempered Sheet and Strip 0 5 mm Less Than or Equal to a Less Than or Equal to 6 mm 980 MPa t.pdf