SNV 71310 a-1959 《SN标准 结构与表述》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

SNI 05-3300-1994 Lifting appliances - Range of maximum capacities for basic models《起重机械 基本模型最大能力》.pdf

SNI 05-3301-1994 Continous mechanical handling equipment Design rules - Apron conveyor《连续机械装卸设备 设计规则 钢板运输机》.pdf

SNI 05-3302-1994 Continous mechanical handling equipment for loose bulk Screw conveyors - Design rules for drive power《散装产品 连续装卸机械 螺旋传送机 电源驱动设计规则》.pdf

SNI 05-3303-1994 Continuous mechanical handling equipment - Vertical bucket elevators with calibrated round still link chains - Characteristic《连续机械装卸设备 带链条垂直铲斗升降机 特征》.pdf

SNI 05-3304-1994 Rectangular punches《矩形衬套》.pdf

SNI 05-3305-1994 Notching punch《缺口液压冲孔》.pdf

SNI 05-3306-1994 Workpiece ejector for cutting tools used in stamping practice《铸摸操作切割工具配置的喷射装置》.pdf

SNI 05-3307-1994 Trigger stops for cutting tools used in stamping practice《铸摸操作切割工具配置的始用挡料销》.pdf

SNI 05-3308-1994 Press working tools stops for cropping《切料用压力工作挡板》.pdf