SNV 81132-1942 《用于测量的千分尺 读取准确性1 100 技术供货条件》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

SIS SMS 10-1973 Taper pins Unhardened《圆锥销 未淬火的》.pdf

SIS SMS 100-1967 Externat self-holding tapers with tenon for tool shanks《刀柄用带榫外部自夹圆锥》.pdf

SIS SMS 1001-1939 《水龙头，手柄，额定压力：12 5》.pdf

SIS SMS 1005-1944 《水龙头，手柄，额定压力：12 5》.pdf

SIS SMS 1007-1946 《带内螺纹的旋塞 标称压力：8》.pdf

SIS SMS 1008-1946 《带内螺纹和外螺纹的旋塞 标称压力：8》.pdf

SIS SMS 101-1971 Tolerances for linear sizes Terminology《线性尺寸公差 术语》.pdf

SIS SMS 1010-1937 《水和蒸汽用铁、铜管路用带内螺纹的管路接头 标称压力：16》.pdf

SIS SMS 1014-1953 《带有旋转排气管的墙式安装水龙头 标称压力：12 5》.pdf