SR 3818-1994 Bitapers grinding wheel Shapes and dimensions《双锥砂轮 形状和尺寸》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DLA MS24614 REV L-2011 SWITCH TOGGLE POSITIVE BREAK LEVER LOCK ENVIRONMENTALLY SEALED SCREW TERMINAL FOUR POLE 469 MOUNTING BUSHING 25 AMPERES.pdf

DLA MS24626 REV D (1)-1996 SCREW TAPPING-THREAD CUTTING TYPE BF OR BT PAN HEAD CROSS RECESSED CORROSION RESISTING STEEL《抗腐蚀凹十字平头BF或BT型 螺纹切削开口螺丝》.pdf

DLA MS24626 REV D VALID NOTICE 1-1988 SCREW TAPPING-THREAD CUTTING TYPE BF OR BT PAN HEAD CROSS RECESSED CORROSION RESISTING STEEL《抗腐蚀凹十字平头BF或BT型 螺纹切削开口螺丝》.pdf

DLA MS24626 REV D-1975 SCREW TAPPING-THREAD CUTTING TYPE BF OR BT PAN HEAD CROSS RECESSED CORROSION RESISTING STEEL《抗腐蚀凹十字平头BF或BT型 螺纹切削开口螺丝》.pdf

DLA MS24632 REV B NOTICE 2-1999 SCREW TAPPING THREAD FORMING- TYPES AB B AND BP APPROXIMATE HOLE SIZES FOR《AB B和BP型螺纹成型开口螺丝的大约孔大小》.pdf

DLA MS24632 REV B VALID NOTICE 1-1988 SCREW TAPPING THREAD FORMING- TYPES AB B AND BP APPROXIMATE HOLE SIZES FOR《AB B和BP型螺纹成型开口螺丝的大约孔大小》.pdf

DLA MS24632 REV B VALID NOTICE 3-2004 SCREW TAPPING THREAD FORMING- TYPES AB B AND BP APPROXIMATE HOLE SIZES FOR《AB B和BP型螺纹成型开口螺丝的大约孔大小》.pdf

DLA MS24632 REV B-1968 SCREW TAPPING THREAD FORMING- TYPES AB B AND BP APPROXIMATE HOLE SIZES FOR《AB B和BP型螺纹成型开口螺丝的大约孔大小》.pdf

DLA MS24633 REV B NOTICE 2-1999 SCREW TAPPING-THREAD CUTTING TYPES BF AND BT APPROXIMATE HOLE SIZES FOR《BF和BT型螺纹切削开口螺丝的大约孔大小》.pdf