SR ISO 4065-1995 Thermoplastic pipes - Universal wall thickness table《热塑性管道 通用壁厚表》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSK-M4D895-A2-2010 POLYBUTYLENE TEREPHTHALATE + ACRYLONITRILE STYRENE ACRYLATE BLEND (PBT+ASA) 20% GLASS FIBER REINFORCED MOLDING COMPOUND INTERIOR TO BE USED WITH FORD WSS-M.pdf

FORD WSK-M4D895-A3-2006 POLYBUTYLENE TEREPHTHALATE + ACRYLONITRILE STYRENE ACRYLATE BLEND (PBT+ASA) 20% GLASS FIBER REINFORCED MOLDING COMPOUND EXTERIOR TO BE USED WITH FORD WSS-M.pdf

FORD WSK-M4D896-A1-2010 POLYBUTYLENE TEREPHTHALATE + ACRYLONITRILE STYRENE ACRYLATE BLEND (PBT+ASA) 30% GLASS FIBER REINFORCED MOLDING COMPOUND GENERAL PURPOSE TO BE USED WITH FOR.pdf

FORD WSK-M4D896-A2-2010 POLYBUTYLENE TEREPHTHALATE + ACRYLONITRILE STYRENE ACRYLATE BLEND (PBT+ASA) 30% GLASS FIBER REINFORCED MOLDING COMPOUND INTERIOR TO BE USED WITH FORD WSS-M.pdf

FORD WSK-M4D896-A3-2006 POLYBUTYLENE TEREPHTHALATE + ACRYLONITRILE STYRENE ACRYLATE BLEND (PBT+ASA) 30 % GLASS FIBER REINFORCED MOLDING COMPOUND EXTERIOR TO BE USED WITH FORD WSS-.pdf

FORD WSK-M4D902-A-2011 POLYPHENYLENE ETHER + POLYAMIDE BLEND (PPE+PA) 20% GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《20%玻璃纤维增强聚亚苯基乙醚+聚酰胺混合物(PPE+.pdf

FORD WSK-M4D905-A1-1996 ABS HIGH IMPACT STRENGTH EXTRUSION MOLDING COMPOUND《高抗冲丙烯腈-丁二烯-苯乙烯共聚物（ABS）挤压成型料》.pdf

FORD WSK-M4D905-A2-2008 ABS HIGH IMPACT STRENGTH EXTRUSION MOLDING COMPOUND INTERIOR - TO BE USED WITH FORD WSS-M99P1111-A 《室内用高冲击强度挤塑化合物ABS(与FORD WSS-M99P1111-A一起使用) 如在FORD WSK-.pdf

FORD WSK-M4D906-A1-2012 ABS HIGH HEAT RESISTANT EXTRUSION MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSK-M4D905-A1)《耐高温丙烯腈挤塑材料 与福特WSS-M99P1111-A 一起使用 在.pdf