SR ISO 5732-1993 Kitchen equipment-Sizes of openings for built-in appliances《处方设备 内置器械的开口尺寸》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

JUS M A0 100-1979 Process measurement control junctions and instrumentation - Symbolic representation Basic reguirements《加工测量控制连接及仪器 符号代表 基本要求》.pdf

JUS M A1 010-1983 Surface roughness Terminology Surface and its parameters《表面粗糙程度 术语 表面及其参数》.pdf

JUS M A1 020-1981 Surface roughness ofindustrial products Terms and definations《工业产品表面粗糙程度 术语及定义》.pdf

JUS M A1 024-1981 Sur face roughness of industrial products Classification of surface fktws《工业产品表面粗糙程度 刮痕表面的分类》.pdf

JUS M A1 025-1981 Surface roghness of industrial products Correlation bettveen surface roughness grade numbers and to- grade lerance grades《工业产品表面粗糙程度 表面粗糙与粗糙等级及配合公差的关系》.pdf

JUS M A1 026-1981 Sur face roghness ofindustrial products Correlation between the surface roughness and surface finishing process《工业产品表面粗糙程度 表面粗糙与表面加工处理的关系》.pdf

JUS M A1 027-1981 Surface roughness ofindustrial products Classification ofscraped surfaces 《工业产品表面粗糙程度 刮痕表面的分类》.pdf

JUS M A1 031-1982 Instruments for the measurement of surface roughness by the profile method Contactprofile meters system M《表面粗糙测量仪器 轮廓法 轮接触仪器，系统 M》.pdf

JUS M A1 032-1980 Classification of imtruments and devices for measurement and evaluation of the geometrical parameters of surface finish《仪器分类及表面加工几何参数测量及估测仪器》.pdf