SS 11 Pt 16-1986 Methods Of Sampling And Test For Oils And Fats Part 16 Determination Of Melting Point (Slip Point)《油脂取样和测试方法 第16部分：熔点的测定（滑动点）》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSK-M4D593-A-2010 POLYETHERSULFONE (PES) 10% GLASS FIBER REINFORCED SE TO BE USED WITH FORD WSS-M99P1111-A 《10%玻璃纤维增强自熄型聚苯醚砜(PES) 与福特WSS-M99P1111-A 一起使用》.pdf

FORD WSK-M4D595-A-2006 POLYAMIDE (PA) 6 40% GLASS FIBER REINFORCED TO BE USED WITH FORD WSS-M99P1111-A (Use WSK-M4D674-A)《40%玻璃纤维增强的聚酰胺6 与标准FORD WSS-M99P1111-A一起使用 使用WSK-M4D674.pdf

FORD WSK-M4D596-A-2010 POLYAMIDE (PA) 66 HEAT STABILIZED 50% GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《汽车内部用受热稳定、50%玻璃纤维增强的聚酰胺66成型料 与标准FORD WS.pdf

FORD WSK-M4D597-A-2010 POLYETHYLENE TEREPHTHALATE (PET) 55 % GLASS FIBRE REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《55%玻璃纤维增强的聚对苯二甲酸乙二酯(PET)成型料 与标准FORD WSS.pdf

FORD WSK-M4D598-A-2006 POLYAMIDE (PA) 66 IMPACT MODIFIED TO BE USED WITH FORD WSS-M99P1111-A (Use WSK-M4D666-A)《冲击改性的聚酰胺66（PA66）成型料 与标准FORD WSS-M99P1111-A一起使用 使用WSK-M4D666-A》.pdf

FORD WSK-M4D604-A-2006 POLYPROPYLENE (PP) COPOLYMER CONTROLLED RHEOLOGY (CR) GRADE TO BE USED WITH FORD WSS-M99P1111-A (Use WSS-M4D638-B)《控制的流变(CR)级聚丙烯(PP)共聚物 与标准FORD WSS-M99P11.pdf

FORD WSK-M4D607-A-2010 POLYBUTYLENE TEREPHTHALATE (PBT) 30 % GLASS FIBRE REINFORCED IMPACT MODIFIED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《30%玻璃纤维增强的聚对苯二甲酸丁二醇酯(PBT.pdf

FORD WSK-M4D608-A-2010 POLYBUTYLENE TEREPHTHALATE (PBT) 33% GLASS FIBER REINFORCED IMPACT MODIFIED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《33%玻璃纤维增强的聚对苯二甲酸丁二醇酯(PBT).pdf

FORD WSK-M4D613-A2-2005 POLYAMIDE 11 (PA11) RIGID HEAT STABILISED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《受热稳定的刚性聚酰胺11成型料 与标准FORD WSS-M99P1111-A一起使用 》.pdf