SS 470 Pt 1-1999 SPECIFICATION FOR Hot finished structural hollow sections of non-alloy and fine grain structural steels Part 1 Technical delivery requirements《非合金及精粒结构钢的热轧空心型材规范 .pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSS-M4G320-A4-1997 SEALER SILICONE RUBBER OXIME CURED LOW VISCOSITY《低粘度肟固化硅橡胶密封剂》.pdf

FORD WSS-M4G323-A10-2006 SEALANT SILICONE RUBBER ALKOXY CURED HIGH VISCOSITY TO BE USED WITH FORD WSS-M99P1111-A 《高粘度烷氧基硫化硅橡胶密封剂(和FORD WSS-M99P1111-A一起使用)》.pdf

FORD WSS-M4G323-A11-2013 SEALANT SILICONE RUBBER OXIME CURED HIGH VISCOSITY BLACK TO BE USED WITH FORD WSS-M99P1111-A (Shown On FORD WSE-M4G323-A4).pdf

FORD WSS-M4G323-A12-2010 SEALANT SILICONE RUBBER ONE COMPONENT TO BE USED WITH FORD WSS-M99P1111-A 《单组分硅橡胶密封剂 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSS-M4G323-A13-2014 SEALANT SILICONE RUBBER OXIME CURED HIGH VISCOSITY BLACK TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4G323-A13-2017 SEALANT SILICONE RUBBER OXIME CURED HIGH VISCOSITY BLACK TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4G323-A7-2013 SEALANT SILICONE RUBBER OXIME CURED VERY HIGH VISCOSITY TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSE-M4G323-A1).pdf

FORD WSS-M4G323-A8-2006 SEALANT SILICONE RUBBER OXIME CURED HIGH VISCOSITY TO BE USED WITH FORD WSS-M99P1111-A (Shown on WSE-M4G323-A1)《高粘度肟固化型硅橡胶密封剂 与标准FORD WSS-M99P1111-A一起使用 .pdf

FORD WSS-M4G323-A9-2013 SEALANT SILICONE RUBBER OXIME CURED HIGH VISCOSITY TO BE USED WITH FORD WSS-M99P1111-A .pdf