TCVN 1076-1986 Sawn wood Terms and definitions《锯木 术语和定义》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

NF E60-172-4-1998 Test conditions for machining centres Part 4 accuracy and repetability of positioning of linear and rotary axes 《多工序数控加工中心的试验条件 第4部分 线性轴和旋转轴定位的精确度和可重复性》.pdf

NF E60-172-5-1998 Test conditions of machining centres Part 5 accuracy and repeatability of positioning of work-holding pallets 《多工序数控加工中心的试验条件 第5部分 工件夹紧盘定位的精确度和可重复性》.pdf

NF E60-181-2001 Manufacturing systems - Acceptance conditions - Piece manufacture suitability evaluation method 《生产系统 验收条件 单件生产稳定性评价方法》.pdf

NF E60-182-2002 Manufacturing systems - Performance indications - Overall equipment effectiveness (TRS) - Global equipment effectiveness (TRG) - Economic equipment effectiveness (T.pdf

NF E60-202-1996 Machine-tools Lubrification systems 《机床 润滑系统》.pdf

NF E60-203-1983 Lubricants industrial oils and related products - Lubricants for lubrication and control of machine tools and similar equipment - Characteristics 《润滑剂 工业用油和相关产品 机床和.pdf

NF E60-275-1990 Machine-tools Conventional working conditions for measurement of noise Grinder-cutting-off machines with abrasive wheels 《机床 测定噪音的常规工作条件 带砂轮的打磨 －切割机床》.pdf

NF E60-276-1990 Machine-tools Conventional working conditions for measurement of noise Grinder-cutting-off machines with cuttersaws 《机床 噪音测量的常规工作条件 带锯刀的打磨 －切割机床》.pdf

NF E60-406 IN1-2009 Safety of machine tools - Drilling machines 《机器工具的安全 钻孔机》.pdf