TCVN 1442-1986 Fresh duck eggs《鲜鸭蛋》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

HB 735-1979 铣铰刀槽用槽铣刀 d＝63mm.pdf

HB 736-1977 铣丝锥槽用槽铣刀D=65~95mm.pdf

HB 737-1979 铣下料铣刀槽用槽铣刀D=45~50mm.pdf

HB 738-1979 加工模具用半圆头立铣刀 D＝6-20mm.pdf

HB 739-1979 加工模具用直柄两齿锥形立铣刀 D＝9.5-44mm.pdf

HB 740-1979 加工模具用直柄半圆头两齿锥形立铣刀 D＝8.1-42.7mm.pdf

HB 741-1979 样板及校对样板检验HB734-79槽铣刀用.pdf

HB 742-1979 样板及校对样板 检验hb 735－79槽铣刀用.pdf

HB 743-1977 样板及校对样板检验HB736-77槽铣刀用.pdf