TCVN 1893-1976 Hexagon botls with reduced head(high precision) Dimensions《六角头缩径螺栓(高精度) 尺寸》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSD-M1A313-A3-2002 STEEL - AUSTENITIC VALVE WROUGHT TO BE USED WITH FORD WSS-M99P1111-A (Shown on WSD-M1A313-A1)《阀门用奥氏体锻造钢 与标准FORD WSS-M99P1111-A一起使用 列于标准WSD-M1A313-A1上》.pdf

FORD WSD-M1A313-A4-2002 STEEL - AUSTENITIC VALVE WROUGHT TO BE USED WITH FORD WSS-M99P1111-A (Shown on WSD-M1A313-A1)《阀门用奥氏体锻造钢 与标准FORD WSS-M99P1111-A一起使用 列于标准WSD-M1A313-A1上》.pdf

FORD WSD-M1A313-A5-2002 STEEL - AUSTENITIC VALVE WROUGHT TO BE USED WITH FORD WSS-M99P1111-A (Shown on WSD-M1A313-A1)《钢 锻轧奥氏体钢阀(和FORD WSS-M99P1111-A一起使用)在文件WSD-M1A313-A1上》.pdf

FORD WSD-M1A314-A1-2002 STEEL MARTENSITIC VALVE WROUGHT TO BE USED WITH FORD WSS-M99P1111-A 《阀门用马氏体锻造钢 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSD-M1A314-A2-2002 STEEL MATENSITIC VALVE WROUGHT TO BE USED WITH FORD WSS-M99P1111-A (Shown on WSD-M1A314-A1)《阀门用马氏体锻造钢 与标准FORD WSS-M99P1111-A一起使用 列于标准WSD-M1A314-A1上》.pdf

FORD WSD-M1A316-A-2011 NODULAR CAST IRON - SILICON MOLYBDENUM ALLOYED TO BE USED WITH FORD WSS-M99P1111-A 《球墨铸铁 硅钼合金 与福特WSS-M99P1111-A 一起使用》.pdf

FORD WSD-M1A317-A2-2003 STEEL - WELDED TUBE NORMALIZED COLD DRAWN TO BE USED WITH FORD WSS-M99P1111-A 《钢 焊接管 冷拔规范化(和FORD WSS-M99P1111-A一起使用》.pdf

FORD WSD-M1A319-A1-2002 STEEL WIRE - VALVE SPRING CHROMIUM SILICON ALLOY DRESSED SURFACE TO BE USED WITH FORD WSS-M99P1111-A 《表面打磨的阀弹簧用铬硅合金钢丝 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSD-M1A333-A1-2013 STEEL SHEET HOT ROLLED LOW CARBON TO BE USED WITH FORD WSS-M99P1111-A (No direct replacements use CBP strategy).pdf