TCVN 1902-1976 Hexagon lock nuts(Standard precision) Dimensions《六角锁紧螺母(标准精度) 尺寸》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

EN ISO 6145-7-2010 en Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 7 Thermal mass-flow controllers《气体分析 用动态容量法制备校准气体混合物 第7部分 热质流控制.pdf

EN ISO 6145-8-2008 en Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 8 Diffusion method《气体分析 动态容量法制备校准气体混合物 第8部分 扩散方法》.pdf

EN ISO 6145-9-2010 en Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 9 Saturation method《气体分析 用动态容积法制备标定气体混合物 第9部分 饱和法》.pdf

EN ISO 6149-1-2007 en Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 1 Ports with truncated housi.pdf

EN ISO 6149-2-2007 en Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 2 Dimensions design test met.pdf

EN ISO 6149-3-2007 en Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 3 Dimensions design test met.pdf

EN ISO 6149-4-2014 en Connections for fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 4 Dimensions design test methods and r.pdf

EN ISO 6149-4-2017 en Connections for fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 4 Dimensions design test methods and r.pdf

EN ISO 6157-2-2004 en Fasteners - Surface discontinuities - Part 2 Nuts《紧固件 表面缺陷 第2部分 螺母［代替 CEN EN 493］》.pdf