TCVN 2369-1987 Raw silk Determination of actual moisture《生丝 实际水分的测定》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

CNS 14718-2003 Method of test for hydrogen sulfide in liquefied petroleum (LP) gases (lead acetate method)《液化石油气硫化氢试验法（醋酸铅法）》.pdf

CNS 14719-2003 Method of test for dryness of propane (valve freeze method)《丙烷干度试验法（阀冻结法）》.pdf

CNS 14720-2003 Stitch types - Classification and terminology《针步型式之分类与标示代号》.pdf

CNS 14721-2003 Edible Spirulina《食用蓝藻》.pdf

CNS 14722-2003 V-Interfaces at the digital local exchange (LE)V5 1-Interface (based on 2048 kbit s) for the support of access network (AN)《在数字市话交换机中V接口以2048KBPS支持接取网络的V5﹒1接口》.pdf

CNS 14723-2003 B-ISDN user part - ATM end system address《宽频整体服务数字网络使用者部异步传送模式终端系统地址》.pdf

CNS 14724-2003 B-ISDN user part - Call priority《宽频整体服务数字网络使用者部呼叫优先权》.pdf

CNS 14725-2003 General criteria for the operation of various types of bodies performing inspection《不同型式的执行检验机构运作之一般准则》.pdf

CNS 14726-2003 Numerical control of machinesProgram format and definition of address wordsData format for positioning、line motion and contouring control systems《工具机数值控制定位、直线运动与轮廓控制.pdf