TCVN 3609-1981 Studs with thread end of 1d (higher accuracy)《用1d螺纹端的双头螺栓(较高精度)》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

NF L09-550-1979 Reference composition of wires with incorporated flux used for soft soldering 《软钎焊用混合助熔剂焊丝的标准成分》.pdf

NF L09-551-1979 Reference composition of fluxes used for soft soldering 《软钎焊用助熔剂的标准成分》.pdf

NF L09-750-1973 Standardized parts Designation system with unlimited number of characters (rech ) 《标准件 字符数量不受限制的标准件的标识方法》.pdf

NF L09-751-1975 Designation of standardized parts and their part number limited to 15 characters 《标准零件的名称及其限制为15个字符的零件编号》.pdf

NF L09-752-2004 Metallic materials - Codes for standard item part numbers 《金属材料 标准件号码的规程》.pdf

NF L09-772-1984 Part Number Codification for Standardized Steel Sheets and Tubes Used in Aeronautical Constructions《用于航空建设的标准化钢板和钢管的零件号码编号》.pdf

NF L09-775-1984 Part Number Codification for Standardized non Ferrous Alloys Semi-Finished Products Used in Aeronautical Constructions《用于航空建设的标准化有色金属合金半成品的零件号码编号》.pdf

NF L09-776-1984 Part Number Codification for Standardized Aluminium and Titanium Alloys Semi-Finished Products Used in Aeronautical Constructions《航空施工中使用的标准化铝和钛合金半成品用零件编号》.pdf

NF L10-007-001-2006 Aerospace series - Metallic materials - Test methods - Part 001 tensile testing at ambient temperature 《航空航天系列 金属材料 试验方法 第001部分 环境温度下的拉伸试验》.pdf