TCVN 3746-1983 Symbolic designations and representations of weld and welded joints《焊缝和焊接接头的符号名称和表示》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD ESB-M4G188-C2-2014 SEALER POLYOLEFIN - HOT MELT - EXTRUDED - NON STAINING (HIGH FLOW) TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD ESB-M4G188-A).pdf

FORD ESB-M4G198-A-1978 SEALER MONOBAKE THUMBABLE GRADE《THUMBABLE级MONOBAKE密封剂》.pdf

FORD ESB-M4G215-A-2008 SEALER VINYL - SPRAYABLE - CHIP RESISTANT - HEAT CURING NONPAINTABLE TO BE USED WITH FORD WSS-M99P1111-A 《乙烯基密封剂 可喷射不易破损 热固化不可涂漆(和FORD WSS-M99P1111-A一起使用)(.pdf

FORD ESB-M4G223-A-1979 SEALER RUBBER BASE - HEAT EXPANDING - EXTRUDED《热膨胀型挤塑橡胶基密封剂》.pdf

FORD ESB-M4G24-A-1978 SEALER CLEAR VENT WINDOW《通风窗透明密封条》.pdf

FORD ESB-M4G248-A1-1983 SEALER HOT MELT - PREFORMED - HIGH HEAT RESISTANT - PRESSURE SENSITIVE ONE SIDE POLYETHYLENE SHEET《单面为聚乙烯布的压敏耐高温预成型热熔密封剂》.pdf

FORD ESB-M4G248-A2-1983 SEALER HOT MELT - PREFORMED - HIGH HEAT RESISTANT - PRESSURE SENSITIVE (Shown on ESB-M4G248-A1)《单面为聚乙烯布的压敏耐高温预成型热熔密封剂 列于标准ESB-M4G248-A1上》.pdf

FORD ESB-M4G250-A-1983 SEALER VINYL BASED - THUMBABLE GRADE - FEATHERABLE - PAINTABLE《可印刷、FEATHERABLE的THUMBABLE级乙烯基密封剂》.pdf

FORD ESB-M4G252-A-2008 SEALER VINYL BASED - HEAT CURING - EXTRUDABLE - SPRAYABLE - ABRASION RESISTANT PAINTABLE TO BE USED WITH FORD WSS-M99P1111-A 《乙烯基密封剂 可涂漆 耐磨可挤压 可喷射热固化(和FORD.pdf