TCVN 4201-2012 Soils Laboratory methods for determination of compaction characteristics《土壤 测定压实特性的实验室方法》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

SANS 3821-2004 Gas welding equipment - Rubber hoses for welding cutting and allied processes《气焊设备 焊接，切割和同类处理用橡胶软管》.pdf

SANS 383-2007 Standard test methods for zinc in water《水中锌含量的试验方法》.pdf

SANS 3834-1-2006 Quality requirements for fusion welding of metallic materials Part 1 Criteria for the selection of the appropriate level of quality requirements《金属材料熔焊的质量要求 第1部分：质.pdf

SANS 3834-2-2006 Quality requirements for fusion welding of metallic materials Part 2 Comprehensive quality requirements《金属材料熔焊的质量要求 第2部分：综合质量要求》.pdf

SANS 3834-3-2006 Quality requirements for fusion welding of metallic materials Part 3 Standard quality requirements《金属材料熔焊的质量要求 第3部分：一般质量要求》.pdf

SANS 3834-4-2006 Quality requirements for fusion welding of metallic materials Part 4 Elementary quality requirements《金属材料熔焊的质量要求 第4部分：基本质量要求》.pdf

SANS 3834-5-2006 Quality requirements for fusion welding of metallic materials Part 5 Documents with which it is necessary to conform to claim conformity to the quality requirement.pdf

SANS 3834-6-2009 Quality requirements for fusion welding of metallic materials Part 6 Guidelines on implementing ISO 3834《金属材料氧炔焊的质量要求 第6部分 ISO 3834的实施指南》.pdf

SANS 384-2007 Standard test methods for lead in water《水中铅含量的试验方法》.pdf