TCVN 4535-1988 Weights with masses up to 50 kg Specifications《质量最高达50kg的砝码 规范》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

KS M ISO 9112-2012 Truck and bus tyres－Method of measuring tyre rolling and bus tyres－Method of measuring tyre rolling《卡车和公共汽车轮胎 轮胎滚动周长的测量方法 承载新轮胎》.pdf

KS M ISO 9117-2-2012 Paints and varnishes－Drying tests－Part 2：Pressure test for stackability《涂料和清漆 干燥试验 第2部分 耐码垛性试验》.pdf

KS M ISO 9117-3-2012 Paints and varnishes－Drying tests－Part 3：Surface-drying test using ballotini《涂料和清漆 干燥试验 第3部分 利用小玻璃球的表面干燥试验》.pdf

KS M ISO 9142-2012 Adhesives－Guide to the selection of standard laboratory ageing conditions for testing bonded joints《粘合剂 胶粘连接试验用标准实验室老化条件的选择导则》.pdf

KS M ISO 9197-2009 Paper board and pulps－Determination of water-soluble chlorides《纸、纸板和纸浆 溶水氯化物的测定》.pdf

KS M ISO 9396-2010 Plastics－Phenolic resins－Determination of the gel time of resols under specific conditions using automatic apparatus《塑料 酚醛树脂 使用自动装置对规定条件下酚醛树脂凝胶时间的测定》.pdf

KS M ISO 9475-2010 Aircraft inner tube and tubeless tyre valves－Cores and caps－Test methods《有内胎和无内胎的航空器轮胎 气门咀、孔及帽 试验方法》.pdf

KS M ISO 9514-2011 Paints and varnishes-Determination of the pot life of multicomponent coating systems-Preparation and conditioning of samples and guidelines for testing《涂料和清漆 多组分.pdf

KS M ISO 9631-2008 Rubber seals－Joint rings for pipelines for hot-water supply up to 110 ℃－Specification for the material《橡胶密封件 最高温度为110℃的热水供给管道的密封环 材料规范》.pdf