TCVN 4590-1988 Canned foods Determination of cellulose content《食品罐头 纤维素含量的测定》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

SAE MA 614A-1998 Hose Assembly Polytetrafluoroethylene (PTFE) Metallic Reinforced 28 000 kPa 204 C Hydraulic Metric《(R)公制液压28 000 kPa和204℃的加固金属聚四氟乙烯(PTEF)软管总成》.pdf

SAE MA 620-1998 Hose Assemblies Convoluted Polytetrafluoroethylene Metallic Reinforced High Temperature Medium Pressure Aircraft Metric《公制盘旋状聚四氟乙烯金属加固的高温中压飞机软管组件》.pdf

SAE MA 7211A-1996 Pins Cotter Steel Corrosion and Heat Resistant UNS S32100 Metric Procurement Specification For《UNS S32100 公制UNS S32100耐蚀和耐热钢开尾销采购规范 FSC 5315 代替MAM 7211[代替 SAE MAM.pdf

SAE MAM 2203B-1994 TOLERANCES METRIC Aluminum Alloy Drawn Tubing.pdf

SAE MAM 3053A-2012 Grease Water Resistant Polyalphaolefin Base《防油防水合成烃基》.pdf

SAE MAM 7211C-1993 COTTER PINS METRIC CORROSION AND HEAT RESISTANT STEEL 18Cr - 10 5Ni - 0 40Ti (UNS S32100).pdf

SAE MAP 1201-1994 Tolerances Hexagon Bar Machined Flat and Forged Wrenching Flat Sizes for Fluid Fittings Metric《流体连接用的公制加工平面和扳拧平面尺寸六角棒公差》.pdf

SAE MAP 1572A-2002 Metric Stud Holes For Aerospace Electrical & Electronic Wire Terminating Devices《航天机电和电子线终端设备的公制螺栓孔》.pdf

SAE MAP 1753A-2001 Hole Sizes Recommended for Metric Fasteners on Propulsion Equipment《针对推进设备的公制紧固件推荐的孔大小》.pdf