TCVN 4635-1988 Artificial leather Determination of tensile strength and elongation of break《人造革 拉伸强度和拉断伸长率的测定》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

SIS SS-ISO 8074-1987 Aerospace - Surface treatment of austenitic stainless steel parts《航空航天 奥氏体不锈钢部件表面处理》.pdf

SIS SS-ISO 8075-1987 Aerospace - Surface treatment of hardenable stainless steel parts《航空航天 可硬化不锈钢部件表面处理》.pdf

SIS SS-ISO 8076-1986 Aerospace process - Anodic treatment of aluminium alloys - Chromic acid process 40 V DC undyed coating《航空产品加工 铝合金阳极处理 铬酸加工 40伏直流电，无着色涂层》.pdf

SIS SS-ISO 8077-1986 Aerospace process - Anodic treatment of aluminium alloys - Chromic acid process 20 V DC undyed coating《航空产品加工 铝合金阳极处理 铬酸加工 20伏直流电，无着色涂层》.pdf

SIS SS-ISO 8078-1986 Aerospace process - Anodic treatment of aluminium alloys - Sulfuric acid process undyed coating《航天过程 铝合金阳极处理 硫酸过程，未染色涂层》.pdf

SIS SS-ISO 8079-1986 Aerospace process - Anodic treatment of aluminium alloys - Sulfuric acid process dyed coating《航天过程 铝合金阳极处理 硫酸过程，染色涂层》.pdf

SIS SS-ISO 8080-1988 Aerospace Anodic treatment of titanium and titanium alloys Sulfuric acid process《航空航天 钛和钛合金阳极处理 硫磺酸过程》.pdf

SIS SS-ISO 8081-1986 Aerospace process - Chemical conversion coating for aluminium alloys - General purpose《航空产品加工 铝合金化学处理涂层 一般用途》.pdf

SIS SS-ISO 8090-1992 Cycles Terminology《自行车 术语》.pdf