TCVN 4648-2009 Sintered metal bushes Determination of radial crushing strength《烧结金属衬套 径向压溃强度的测定》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

SIS SMS 2427-1964 Tolerances for gauges Holes ISO ZB8-ZB10《测规公差 ISO孔公差ZB8-ZB10》.pdf

SIS SMS 2428-1964 Tolerance for gauges Holes ISO ZCS - ZC10《测规公差 ISO孔公差ZCS - ZC10》.pdf

SIS SMS 2431-1964 Tolerances for gauges Shafts ISO alO - al3《测规公差 ISO轴公差alO - al3》.pdf

SIS SMS 2432-1964 Toleranc es for gauges Shafts ISO b9 - bl3《测规公差 ISO轴公差b9 - bl3》.pdf

SIS SMS 2433-1964 Tolerances for gauges Shafts ISO cS-cl2《测规公差 ISO轴公差cS-cl2》.pdf

SIS SMS 2434-1964 Toleranre i for gauges Shafts ISO cd7 -cdlO《测规公差 ISO轴公差cd7 -cdlO》.pdf

SIS SMS 2435-1964 Tolerances for gauges Shafts ISO dl - d11《测规公差 ISO轴公差dl - d11》.pdf

SIS SMS 2436-1964 Tolerances for gauges Shafts ISO e6-el0《测规公差 ISO轴公差e6-el0》.pdf

SIS SMS 2437-1964 Tolerancex for gauges shafs ISO ef-5 - ef9《测规公差 ISO轴公差ef5 - ef9》.pdf