TCVN 4725-2008 Metal cutting machines General safety construction requirements《金属切削机 一般安全施工要求》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

EN 1015-7-1998 en Methods of Test for Mortar for Masonry - Part 7 Determination of Air Content of Fresh Mortar《圬工用灰浆试验方法 第7部分 新鲜灰浆空气含量的测定》.pdf

EN 1015-9-1999 en Methods of Test for Mortar for Masonry - Part 9 Determination of Workable Life and Correction Time of Fresh Mortar (Incorporates Amendment A1 2006)《圬工灰浆试验方法 第9部分 .pdf

EN 10151-2002 en Stainless steel strip for springs Technical delivery conditions《弹簧用不锈钢带材 交货技术条件》.pdf

EN 10152-2009 752 Electrolytically zinc coated cold rolled steel flat products for cold forming - Technical delivery conditions (Incorporating corrigendum December 2011)《电镀锌冷轧平钢轧材 .pdf

EN 10152-2017 en Electrolytically zinc coated cold rolled steel flat products for cold forming - Technical delivery conditions《冷成型用电解镀锌扁平冷轧材-交货技术条件》.pdf

EN 10160-1999 en Ultrasonic Testing of Steel Flat Product of Thickness Equal or Greater Than 6 mm (Reflection Method)《厚度等于或大于6mm扁钢制品的超声检验(反射方法)》.pdf

EN 10162-2003 en Cold rolled steel sections - Technical delivery conditions - Dimensional and cross-sectional tolerances《冷轧钢型材 交货技术条件 尺寸和横截面公差》.pdf

EN 10163-1-2004 en Delivery requirements for surface condition of hot-rolled steel plates wide flats and sections - Part 1 General requirements (Incorporating corrigendum February .pdf

EN 10163-2-2004 en Delivery requirements for surface condition of hot-rolled steel plates wide flats and sections - Part 2 Plate and wide flats《热轧钢板 宽钢带与型材表面状态交付要求 第2部 分板材和宽带材》.pdf