TCVN 4836-2-2009 Meat and meat products Determination of chloride content Part 2 Potentiometric method《肉和肉制品 氯化物含量的测定 第2部分 电位滴定法》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

KS D 0295-2009 Visual inspection and hardness test for selective corrosion of alloys《金属材料选择性腐蚀的外观检验和硬度测定》.pdf

KS D 0296-2009 Standard practice for determining area specific resistance of oxide scale formed on stainless steel plates《不锈钢板材高温氧化涂层的面积电阻测量试验方法》.pdf

KS D 0297-2009 Test method for determination of pitting corrosion resistance for seal weldment between tube and tube sheet《管子与管板的密封焊件之间的抗点蚀性能的测定试验方法》.pdf

KS D 0299-2009 Laboratory method for the preparation of rust grades《除锈等级编制的实验室方法》.pdf

KS D 0404-2009 Method for determination of gold in gold jewellery alloys《金珠宝合金中金的含量测定》.pdf

KS D 0410-2012 Method for determination of flow rate at elevated temperatures for powder mixed intended for warm compacting《高温粉末混合加热压制时流量测定方法》.pdf

KS D 0411-2012 Method for determination of apparent density at elevated temperatures for powder mixes intended for warm compacting《高温粉末混合加热压制时表观密度的测定方法》.pdf

KS D 0422-2007 Method for evaluation of hydrogen delayed fracture resistance of high strength steels for bolts《高强度螺栓的氢抗延迟断裂性能进行评估方法》.pdf

KS D 1650-2008 General rules for photoelectric emission spectrochemical analysis of metal materials《金属材料的光电发射光谱分析方法通则》.pdf