TCVN 4938-1989 Metal cutting machines Methods for control of the angle position of movable tool《金属切削机 可移动机床角位置的控制方法》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

SAE AMS 10135B-2012 Angle - Bulb Section Extruded《角 球状物的凸出部分》.pdf

SAE AMS 10136B-2012 Tee - Extruded《三通 挤压》.pdf

SAE AMS 10137B-2012 Channel - Extruded《槽道 凸出部分》.pdf

SAE AMS 10138B-2012 Zee - Equal Leg Extruded《Z形物 对等支柱的凸出部分》.pdf

SAE AMS 10139B-2012 Zee - Unequal Leg Extruded《Z字形 不等的支架挤压》.pdf

SAE AMS 10140B-2012 I - Section - Extruded《I-凸出部分》.pdf

SAE AMS 10141B-2012 Tee - Bulb Section Extruded《T形物 球状物的凸出部分》.pdf

SAE AMS 1320A-1991 Remover Decal Adhesive《清洗剂 印花粘着剂》.pdf

SAE AMS 1370A-2008 Compound Rust Remover Liquid Aircraft and Aerospace Components Immersion Tank Method《采用浸没法的飞行器和航空航天元部件用液态除锈剂混合物》.pdf