TCVN 5221-1990 Metal cutting machines Methods for control of constancy diameters of specimen《金属切削机 试样的等直径的控制方法》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM D7203-11(2017) Standard Practice for Screening Trichloroethylene (TCE)-Contaminated Media Using a Heated Diode Sensor.pdf

ASTM D7665-17 Standard Guide for Evaluation of Biodegradable Heat Transfer Fluids.pdf

ASTM D8052D8052M-17 Standard Test Method for Quantification of Air Leakage in Low-Sloped Membrane Roof Assemblies.pdf

ASTM D8060-17 Standard Specification for 2-Bromo-3,3,3-Trifluoro-1-Propene (CF3CBr=CH2).pdf

ASTM E2987E2987M-17 Standard Terminology for Sustainable Manufacturing.pdf

ASTM E316-17 Standard Test Method for Determination of Iron in Manganese Ores by Hydrogen Sulfide Reduction-Dichromate Titrimetry.pdf

ASTM F2071-00(2017) Standard Specification for Switch, Position Proximity (Noncontact) or Limit (Mechanical Contact), Fiber-Optic.pdf

ASTM F2929-17 Standard Specification for Crosslinked Polyethylene (PEX) Tubing of 0.070 in. Wall and Fittings for Radiant Heating Systems up to 75 psig.pdf

ASTM F3095-17a Standard Practice for Laser Technologies for Direct Measurement of Cross Sectional Shape of Pipeline and Conduit by Rotating Laser Diodes and CCTV Camera System.pdf