TCVN 5346-1991 Safety requirements boilers General requirements for calculation stability《锅炉安全要求 稳定性计算的一般要求》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

CSN 25 4254-1961 Screw gauges Measuring parts for not go limits of cylindrical thread gauges Cycle thread《非穿过型 圆柱型螺纹规限制的测量部件》.pdf

CSN 25 4260-1961 Screw gauges Ring limit thread go gauges Diameter from 8 to 100 mm Cycle thread《穿过型规环形限制螺纹 直径为8m到100mm的环形螺纹》.pdf

CSN 25 4261-1961 Screw gauges Reference gauges for new ring thread go gauges Cycle thread《穿过型新环形螺纹校准量规 环形螺纹》.pdf

CSN 25 4262-1961 Screw gauges Measuring parts of reference gauges for new ring thread go gauges Cycle thread《穿过型规新型环形螺纹校准量规的测量部件》.pdf

CSN 25 4263-1961 Screw gauges Reference gauges on wearing for ring thread go gauges Cycle thread《穿过型耐磨环形螺纹检校量规 环形螺纹》.pdf

CSN 25 4264-1961 Screw gauges Measuring parts of reference gauges on wearing for ring thread go gauges Cycle thread《穿过型量规耐磨环形校准螺纹的测量部件 环形螺纹》.pdf

CSN 25 4265-1961 Screw gauges Limit ring thread not go gauges Diameter from 8 to 100 mm Cycle thread《非穿过型规限制环形螺纹 直径8 到100 mm的环形螺纹》.pdf

CSN 25 4266-1961 Screw gauges Reference gauges for ring thread not go gauges Cycle thread《非穿过型规环形螺纹的校准量规 环形螺纹》.pdf

CSN 25 4267-1961 Screw gauges Measuring parts of reference gauges for ring thread not go gauges Cycle thread《非穿过型端螺纹校准量规的测量部件 环形螺纹》.pdf