TCVN 5465-18-2009 Textiles Quantitative chemical analysis Part 18 Mixtures of silk and wool or hair (method using sulfuric acid)《纺织品 定量化学分析 第18部分 蚕丝与羊毛或其它动物毛纤维的混合物(硫酸法)》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

AWS D10 11M D10 11-2007 Guide for Root Pass Welding of Pipe Without Backing《管路无衬垫根部焊接指南 (取代 AWS D10 11 AWS D10 11)》.pdf

AWS D10 12M D10 12-2000 Guide for Welding Mild Steel Pipe《焊接低碳钢管指南》.pdf

AWS D10 13 D10 13M-2001 Recommended Practices for the Brazing of Copper Tubing and Fittings for Medical Gas Systems《医疗气体系统用獭铜制管的钎焊的推荐惯例》.pdf

AWS D10 14M D10 14-2010 Guide for Multipass Orbital Machine Pipe Groove Welding (First Edition).pdf

AWS D10 18M D10 18-2008 Guide for Welding Ferritic Austenitic Duplex Stainless Steel Piping and Tubing (First Edition)《素体 奥氏体双相不锈钢管和管道的焊接指南 第1版》.pdf

AWS D10 18M D10 18-2018 Guide for Welding Ferritic Austenitic Duplex Stainless Steel Piping and Tubing (Second Edition).pdf

AWS D10 4-1986 Recommended Practices for Welding Austenitic Chromium-Nickel Stainless Steel Piping and Tubing《奥氏体镍铬合金不锈钢管焊接推荐惯例》.pdf

AWS D10 6 D10 6M-2000 Recommended Practices for Gas Tungsten Arc Welding of Titanium Pipe and Tubing《惰性气体保护钛合金管焊接推荐惯例》.pdf

AWS D10 7M D10 7-2008 Guide for the Gas Shielded ArcWelding of Aluminum and Aluminum Alloy Pipe (4th edition)《铝和铝合金管道气体保护电弧焊用指南 第4版》.pdf