TCVN 5699-2-24-2007 Household and similar electrical appliances Safety Part 2-24 Particular requirements for refrigerating appliances ice-cream appliances and ice-makers《家用和类似用途电器 .pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSS-M4D1023-A1-2012 POLYAMIDE (PA) 6 HEAT STABILIZED 15% GLASS FIBER REINFORCED MOLDING COMPOUND IMPACT MODIFIED INTERIOR TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D1024-A1-2012 THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO) MOLD-IN-COLOR MOLDING COMPOUND EXTERIOR HIGH IMPACT LOW STIFFNESS TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D1024-A1-2015 THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO) MOLD-IN-COLOR MOLDING COMPOUND EXTERIOR HIGH IMPACT LOW STIFFNESS TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D1025-A1-2013 THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO) MOLD-IN-COLOR MOLDING COMPOUND EXTERIOR HIGH IMPACT MEDIUM-LOW STIFFNESS TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D1025-A1-2015 THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO) MOLD-IN-COLOR MOLDING COMPOUND EXTERIOR HIGH IMPACT MEDIUM-LOW STIFFNESS TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D1028-A1-2013 POLYPROPYLENE (PP) COPOLYMER MEDIUM IMPACT COMPOUND TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D1028-A2-2013 POLYPROPYLENE (PP) COPOLYMER MEDIUM IMPACT COMPOUND INTERIOR TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D1028-A3-2018 POLYPROPYLENE (PP) COPOLYMER IMPACT MODIFIED COMPOUND MOLD IN COLOR INTERIOR TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSS-M4D1028-A2).pdf

FORD WSS-M4D1029-A1-2016 POLYAMIDE (PA) 66 HEAT STABILIZED 40% GLASS FIBER MINERAL REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A .pdf