TCVN 5874-1995 Recommended practice for the X ray inspection of fusion welded butt joints for aluminium and its alloys and magnesium and its alloys 5 to 50 mm thick《厚度5mm至50mm的铝及铝合.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ANSI ASA S12.9 PART 2-1992 American National Standard Quantities and Procedures for Description and Measurement of Environmental Sound Part 2 Measurement of Long-Term Wide-Area Sou.pdf

ANSI ASA S12.9 PART 3-2013 American National Standard Quantities and Procedures for Description and Measurement of Environmental Sound C Part 3 Short-term Measurements with an Obse.pdf

ANSI ASA S12.9 PART 4-2005 American National Standard Quantities and Procedures for Description and Measurement of Environmental Sound C Part 4 Noise Assessment and Prediction of L.pdf

ANSI ASA S12.9 PART 5-2007 American National Standard Quantities and Procedures for Description and Measurement of Environmental Sound C Part 5 Sound Level Descriptors for Determin.pdf

ANSI ASA S12.9 Part 5-2007 Quantities and Procedures for Description and Measurement of Environmental Sound - Part 5 Sound Level Descriptors for Determination of Compatible Land Us.pdf

ANSI ASA S12.9 PART 6-2008 American National Standard Quantities and Procedures for Description and Measurement of Environmental Sound Part 6 Methods for Estimation of Awakenings A.pdf

ANSI ASA S12.9 PART 7-2016 American National Standard Quantities and Procedures for Description and Measurement of Environmental Sound Part 7 Measurement of Low-frequency Noise and.pdf

ANSI ASA S2.1-2009 American National Standard Mechanical vibration shock and condition monitoring C Vocabulary - Nationally Adopted International Standards《机械振动 冲击和状态监测.词汇》.pdf

ANSI ASA S2.16-1997 American National Standard Vibratory Noise Measurements and Acceptance Criteria of Shipboard Equipment《船载设备的振动噪声测量和验收要求》.pdf