TCVN 6320-2007 Rubber latex natural concentrade Determination of sludge content《浓缩天然胶乳 淤泥含量的测定》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM A856 A856M-2003(2014) Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Carbon Steel Wire《锌-5%铝稀土合金镀层钢丝的标准规格》.pdf

ASTM A857 A857M-2007 Standard Specification for Steel Sheet Piling Cold Formed Light Gage《冷成形轻型薄钢板桩标准规范》.pdf

ASTM A857 A857M-2007(2013) Standard Specification for Steel Sheet Piling Cold Formed Light Gage《冷成型轻型薄钢板桩标准规格》.pdf

ASTM A858 A858M-2007 Standard Specification for Heat-Treated Carbon Steel Fittings for Low-Temperature and Corrosive Service《低温和腐蚀情况下用热处理碳钢配件的标准规范》.pdf

ASTM A858 A858M-2009 Standard Specification for Heat-Treated Carbon Steel Fittings for Low-Temperature and Corrosive Service《低温和腐蚀情况下用热处理碳素钢配件的标准规范》.pdf

ASTM A858 A858M-2010 Standard Specification for Heat-Treated Carbon Steel Fittings for Low-Temperature and Corrosive Service《低温和腐蚀性条件下用热处理碳钢标准规范》.pdf

ASTM A858 A858M-2010a Standard Specification for Heat-Treated Carbon Steel Fittings for Low-Temperature and Corrosive Service《低温和腐蚀性条件下热处理碳钢的标准规格》.pdf

ASTM A858 A858M-2013 Standard Specification for Heat-Treated Carbon Steel Fittings for Low-Temperature and Corrosive Service《低温和腐蚀性条件下热处理碳钢的标准规格》.pdf

ASTM A858 A858M-2014 Standard Specification for Heat-Treated Carbon Steel Fittings for Low-Temperature and Corrosive Service《低温和腐蚀情况下用热处理碳素钢配件的标准规格》.pdf