TCVN 6355-6-2009 Bricks Test methods Part 6 Determination of void volume 《砖 试验方法 第6部分 空隙容积的测定 》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASD-STAN PREN 2070-5-1987 Aerospace Series Aluminium and Aluminium Alloy Wrought Products - Technical Specification - Part 5 - Tube Used Under Pressure (Edition 1)《航空航天系列 铝和铝合金压力加工.pdf

ASD-STAN PREN 2070-6-1987 Aerospace Series Aluminium and Aluminium Alloy Wrought Products - Technical Specification - Part 6 - Rivet Wire (Edition 1)《航空航天系列 铝和铝合金压力加工制品 技术规范 第6部分 铆.pdf

ASD-STAN PREN 2070-7-1987 Aerospace Series Aluminium and Aluminium Alloy Wrought Products - Technical Specification - Part 7 - Wrought Forging Stock (Edition 1)《航空航天系列 铝和铝合金压力加工制品 .pdf

ASD-STAN PREN 2071-1989 Sheets in Aluminium and Aluminium Alloys - Thickness A Less Than or Equal to 6 mm - Dimensions (C6 A01)《铝和铝合金制板材 厚度a≤6mm 尺寸（C6 A01）》.pdf

ASD-STAN PREN 2072-2004 Aerospace series Aluminium AL-P1050A H14 Sheet and strip 0 4 mm Less than or equal to a Less than or equal to 6 mm (Edition P1)《航空航天系列 0 4mm≤a≤6mm的铝AL-P1050.pdf

ASD-STAN PREN 2076-1-1987 Aerospace Series Aluminium and Magnesium Alloy Ingots and Castings - Technical Specification - Part 1 - General Requirements (Edition 1)《航空航天系列 铝和镁合金锭坯和铸件.pdf

ASD-STAN PREN 2076-2-1987 Aerospace Series Aluminium and Magnesium Alloy Ingots and Castings - Technical Specification - Part 2 - Ingots for Remelting (Edition 1)《航空航天系列 铝和镁合金锭坯和铸件.pdf

ASD-STAN PREN 2076-3-1987 Aerospace Series Aluminium and Magnesium Alloy Ingots and Castings - Technical Specification - Part 3 - Pre-Production and Production Castings (Edition 1).pdf

ASD-STAN PREN 2078-1997 Aerospace Series Metallic Materials Manufacturing Schedule Inspection Schedule Inspection and Test Report Definition General Principles Preparation and Appr.pdf