TCVN 6356-1998 Machine tools Three jaw drill chucks《机床 三爪钻头夹盘》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

SAE AMS 4820E-2003 Bearings Leaded Copper 70Cu - 28 5Pb Steel Back (UNS C98400)《UNS C98400钢背70 Cu-28 5Pb铅铜轴承》.pdf

SAE AMS 4827E-2004 Bearings Leaded Bronze 80Cu - 10Pb - 10Sn Steel Back《轴承 含铅青铜80Cu-10Pb-10Sn钢背》.pdf

SAE AMS 4842E-2004 Castings Leaded Bronze Sand and Centrifugal 80Cu - 10Sn - 9 5Pb As Cast (UNS C93700)《80Cu 10Sn 9 5Pb铅青铜砂型和离心铸件》.pdf

SAE AMS 4845J-2015 Tin Bronze Castings Sand and Centrifugal 87 5Cu - 10Sn - 2Zn As Cast (UNS C90500).pdf

SAE AMS 4855G-2009 Leaded Red Brass Sand and Centrifugal Castings 85Cu C 5 0Sn C 5 0Pb C 5 0Zn As Cast (UNS C83600)《85Cu-5 0Sn-5 0Pb-5 0Zn铸造的加铅红黄铜 砂和离心铸件》.pdf

SAE AMS 4860F-2009 Manganese Bronze Sand and Centrifugal Castings 58Cu C 39Zn C 1 2Fe C 1 0Al C 0 80Mn As Cast (UNS C86500)《58Cu-39Zn-1 2Fe-1 0Al-0 80Mn铸造的锰青铜 砂和离心铸件》.pdf

SAE AMS 4862F-2001 Manganese Bronze Sand and Centrifugal Castings 63Cu - 24Zn - 6 2Al - 3 8Mn - 3 0Fe High Strength As Cast (UNS C86300)《63Cu 24Zn 6 2Al3 8Mn 3 0Fe高强度铸造的锰青铜砂型和离心铸件》.pdf

SAE AMS 4863-2015 Copper-Nickel-Tin Alloy Castings Cu C 15Ni C 8Sn Hot Isostatically Pressed Solution Annealed and Spinodal Heat Treated (UNS C96900).pdf

SAE AMS 4870F-2004 Aluminum Bronze Centrifugal and Chill Castings 85Cu - 11Al - 3 6Fe As Cast (UNS C95420)《85Cu-11Al-3 6Fe铝铜离心和冷硬铸件》.pdf