TCVN 6451-1A-2004 Rules for the classification and construction of high speed crafts Part 1A General Regulations for the Supervision《高速船的入级和建造规范 第1A部分 监管一般规则》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

SAE AMS 3273F-2011 Chloropene (CR) Rubber Sheet Nylon Cloth Reinforced Weather Resistant《耐风化的尼龙布增强氯丁(CR)橡胶薄板》.pdf

SAE AMS 3274H-2011 Acrylonitrile Butadiene (NBR) Rubber Sheet and Molded Shapes Nylon Cloth Reinforced Fuel Resistant《耐燃料的尼龙织物增强的丁腈橡胶薄板和模制型材》.pdf

SAE AMS 3275C-2009 Sheet Acrylonitrile Butadiene (NBR) Rubber and Non-Asbestos Fiber Fuel and Oil Resistant《非石棉纤维 耐燃料及耐油丁腈橡胶(NBR)薄板》.pdf

SAE AMS 3276E-2008 Sealing Compound Integral Fuel Tanks and General Purpose Intermittent Use to 360 F (182 C)《断续使用至360℉(182℃)的整体油箱和一般用途用密封化合物》.pdf

SAE AMS 3276G-2016 Sealing Compound Integral Fuel Tanks and General Purpose Intermittent Use to 360 (182 .pdf

SAE AMS 3278A-2008 Sealing and Coating Compound Polyurethane (PUR) Fuel Resistant High Tensile Strength Elongation For Integral Fuel Tanks Fuel Cavities General Purpose《密封和涂料混合物.pdf

SAE AMS 3279D-2013 Sealing Compound Sprayable for Integral Fuel Tanks and Fuel Cell Cavities For Intermittent Use to 350F (177C)《断续使用至350℉(177℃)的整体油箱和油箱空腔用可喷涂密封化合物》.pdf

SAE AMS 3281E-2010 Sealing Compound Polysulfide (T) Synthetic Rubber for Integral Fuel Tank and Fuel Cell Cavities Low Density for Intermittent Use to 360 F (182 C)《360F(182C)间歇性使用.pdf

SAE AMS 3283B-2011 Sealing Compound Polysulfide Non-Curing Groove Injection Temperature and Fuel Resistant《非养护槽样温度且耐燃料的聚硫化物密封剂》.pdf