TCVN 6489-2009 Water quality Evaluation of ultimate aerobic biodegradability of organic compounds in aqueous medium Carbon dioxide evolution test《水质 水介质中有机化合物最终有氧生物降解能力的评价 二氧化碳变化试验.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSS-M9P9-C-2014 DYNAMIC SEALING PERFORMANCE SPECIFICATION TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M9P9-C-2016 DYNAMIC SEALING PERFORMANCE SPECIFICATION TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M9P9-D-2016 DYNAMIC SEALING PERFORMANCE SPECIFICATION TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WST-M1C231-B2-2008 LUBRICANT POLYALKYLENE GLYCOL TO BE USED WITH FORD WSS-M99P1111-A 《聚二醇润滑剂 与标准FORD WSS-M99P1111-A一起使用 列于标准FORD WSH-M1C231-B上［使用 FORD WSS-M13P13-A FORD WS.pdf

FORD WSZ-M2G383-A3-2004 TAPE ADHESIVE EPOXY BASED STRUCTURAL HIGH-EXPANDING HIGH TEMPERATURE CURING TO BE USED WITH FORD WSS-M99P1111-A (Shown on WSB-M2G383-A1)《高温固化高膨胀性结构用环氧树脂基粘.pdf

FORD WSZ-M4D778-A-2008 ABS HIGH IMPACT MOLDING COMPOUND PAINTABLE - TO BE USED WITH FORD WSS-M99P1111-A 《可油漆高冲击模制物料ABS(与FORD WSS-M99P1111-A一起使用) (使用 FORD WSS-M4D827-A3)》.pdf

FORD WSZ-M4D781-A-2008 ABS SELF EXTINGUISHING MOLDING COMPOUND INTERIOR - TO BE USED WITH FORD WSS-M99P1111-A 《丙烯腈-丁二烯-苯乙烯 内部使用自熄模塑料(和FORD WSS-M99P1111-A一起使用)(使用 FORD WSK-M4D827-.pdf

FORD WSZ-M4D783-A-2010 POLYPROPYLENE (PP) COPOLYMER 20 % MINERAL FILLED MELT FLOW RATE 0 8 - 2 0 TO BE USED WITH FORD WSS-M99P1111-A 《熔体流动速率为0 8-2 0的20%矿物填充的的聚丙烯(PP)均聚物 与标准FORD .pdf

FORD WSZ-M4D787-A-2006 POLYAMIDE (PA) 6 HEAT STABILIZED 33% SHORT GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A (Use WSK-M4D673-A)《受热稳定、33%短玻璃纤维增强的聚.pdf